空气过滤器是指空气过滤装置，一般有平板式过滤器，折叠式过滤器，袋式过滤器，组合式过滤器等形态，多用于洁净车间，洁净厂房，实验室及洁净手术室。
空气过滤器根据其工作过滤精度和过滤效率可分为初效过滤器，主要过滤5μm≥ 的尘埃粒子；中效过滤器，主要过滤≥1um 的尘埃粒子；高效过滤器，主要过滤0.3μm≥ 的尘埃粒子。适用于常温，常湿，允许含有微量酸，碱有机溶剂的空气过滤，广泛应用于表面处理，涂装，光学，电子，空调，航天，航空，食品，制药，生物工程等领域。
辽宁明创环保科技有限公司辽宁过滤器生产厂家。

Hepa Mini-Pleated Filter, Class E11 to H14
高效密褶式无隔板过滤器

Advantages特点:

Low pressure drop
阻力低
Double faceguard
双面保护网
Guaranteed performance
性能稳定
Individually tested according to EN 1822
依据EN1822逐台测试

 

Application:Final or return filtration for ciean rooms with turbulent flow.
主要应用: 适用于洁净室内层流风口的终端过滤和回风过滤

 

Specification 性能参数
Type:High efficiency panel filter.
类型:高效板式过滤器
Media:Wet-laid glass fibre paper.
滤材: 抗水型玻璃纤维滤纸
Frame:Extruded and anodized aluminium.
外框材质: 阳极氧化铝合金型材
Separator: Hot-melt beads.
分隔物:热熔胶
Sealant:Polyurethane
密封胶: 聚氨酯
EN1822:2009 filter class:
过滤效率等级
H13(EN1822),≥99.95% at MPPS
H14(EN1822),≥99.995% at MPPS
U15(EN1822),≥99.9995% at MPPS
U16(EN1822),≥99.99995% at MPPS

Recommended final pressure drop:500 Pa
建议终阻力:500Pa
Temperature:90°C maximum in continuous service
连续稳定运行温度:不高于90°C

Thickness vs Efficiency vs Pressrue drop
厚度/效率/阻力-对应关系表
Thickness		初阻力Pressure drop
厚度		@1.5m/s/Pa
(inches)	(mm)	E11	E12	E13	E14
21/2	69	95	100	115	130
31/2	90	80	90	100	110
41/3	110	50	55	60	65

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)		Air Flow
(lnches)	(mm)	m3/Hr@1.5m/s
12x12	305x305	150
24x12	610x305	300
24x24	610x610	600
107/8x107/8	530x530	450
30x24	762x610	750
36x24	915x610	900
36x36	915x915	1350
48x36	1210x610	1200
48x36	1210x915	1800
48x48	1210x1210	2400

Note: Pressure drcp+/-15%

Odd sizes available

注：阻力+/-15%

可定制任意非标尺寸

 

 

Oid Fashion Pleated Box Filter Class E11 to H14
有隔板箱式高效过滤器

Advantages特点:

Robust design
高强度的结构设计
Fine fibre ensures that filter maintains its
efficiency throughout its life in the system
优质的滤材纤维保证过滤器在其寿命周期内维持良好的过滤效率
Individually tested according to EN 1822
依据EN1822逐台扫描

Application:Built-up filter banks,split systems,free- standing units.
应用:适合用于组合式过滤系统,分流系统,独立处理单元组

Specification 性能参数

Type:Rigid pleated box filter.
类型:有隔板密褶箱式过滤器
Media:Wet-laid glass fibre paper.
滤材:抗水型玻璃纤维滤纸
Frame:Galvanised steel.
外框材质:镀锌钢板
Separator: Aluminum/Paper foil
分隔物: 铝/纸箔
Sealant:Polyurethane
密封胶:聚氨酯
EN1822:2009filter class:
过滤效率等级:
E11(EN1822),≥95% at MPPS
E12(EN1822),≥99.5% at MPPS
H13(EN1822),≥99.95% at MPPS
H14(EN1822),≥99.995 at MPPS
Recommended final pressure drop:500 Pa.
建议终阻力:500Pa
Temperature:90°C maximum in continuous service.
连续稳定运行温度: 不高于90°C

Thickness vs Efficiency vs Pressrue drop
厚度/效率/阻力-对应关系表
Thickness		初阻力Pressure drop
厚度		@1.5m/s/Pa
(inches)	(mm)	F7	F8	F9
2	50	100	110	120
3	78	80	90	100
82/3	220	75	85	95
12	292	70	80	90

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)		Air Flow
(lnches)	(mm)	m3/Hr@1.5m/s
20x10	500x250	700
20x20	500x500	1350
24x24	610x610	3600
24x12	610x305	1800
18x36	457x915	2250

Note: Pressure drcp+/-15%

Odd sizes available

注：阻力+/-15%

可定制任意非标尺寸

 

"V" Bank W Type Filter, Class E11 to H14
W型高效过滤器

Advantages特点:
可观的过滤面积
Long operating lite
运行寿命长
No metal parts
无任何金属部件
Large dust holding capacity
巨大的容尘量

Application:Air conditioning applications and prefitration for clean rooms.
应用:适用于中央空调系统,和洁净室的净化

Specification 性能参数

Type:High performance W type tilter.
类型:高性能“W”过滤器
Media:Wet-laid glass fibre paper.
滤材:杭水型玻瑱纤维滤纸
Frame:Polystyrene
外框材质: 聚苯乙烯
Separator:Hot melt glue.
分隔物: 热熔胶
Sealant:Polyurethane
密封股: 聚氨酯
EN1822:2009filter class:
过滤效率等级: 
E11(EN1822),≥95% at MPPS
E12(EN1822),≥99.5% at MPPS
H13(EN1822),99.95% at MPPS
H14(EN1822),99.995% at MPPS
Recommended final pressure drop:600 Pa.
建议终阻力:600Pa
Temperature:90° C maximum in continuous service.
连续稳定运行温度:不高子90°C

Thickness vs Efficiency vs Pressrue drop
厚度/效率/阻力-对应关系表
Thickness		初阻力Pressure drop
厚度		@1.5m/s/Pa
(lnches)	(mm)	E11	E12	H13	H14
12	292	230	255	285	300

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)		Air Flow
(lnches)	(mm)	m3/Hr@2.5m/s
24x12	595x287	1700
24x24	595x595	3400
24x22	595x495	2800

Note: Pressure drcp+/-15%

Odd sizes available

注：阻力+/-15%

可定制任意非标尺寸

 

Super Hellen Filter, Class E11 to H14
大风量高效过滤器

Advantages特点:
可观的过滤面积
Long operating life
运行寿命长
Up to 4000 m3/hr air flow
允许通过的风量高达4000m3/hr
Large dust holding capacity
巨大的容尘量

Application:High air flow air conditioning and process air applications.
应用: 适用于大风量的空气处理系统

Specification 性能参数
Type:HEPA filter with high airflow.
类型: 大风量高效过滤器
Media:Wet-laid glass fibre paper.
滤材: 抗水型玻璃纤维滤纸
Frame:Galvanised steel.
外框材质: 镀锌钢板
Separator:Hot melt glue.
分隔物:热熔胶
Sealant:Polyurethane
密封胶: 聚氮酯
EN1822:2009filter class: 
E11(EN1822).≥95% at MPPS
E12(EN1822).≥99.5% at MPPS
H13(EN1822),≥99.95% at MPPS
H14(EN1822),≥99,995 at MPPS

Recommended final pressure drop:600 Pa.
建议终阻力:600Pa
Temperature:90°C maximum in continuous service.
连续稳定运行温度:不高于90°C

Thickness vs Efficiency vs Pressrue drop
厚度/效率/阻力-对应关系表
Thickness		初阻力Pressure drop
厚度		@3.0m/s/Pa
(inches)	(mm)	E11	E12	H13	H14
21/2	69	95	265	280	295

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)		Air Flow
(lnches)	(mm)	m3/Hr@2.5m/s
24x12	610x305	2000
24x24	610x610	4000
24x12	595x287	2000
24x24	595x595	4000

Note: Pressure drcp+/-15%

Odd sizes available

注：阻力+/-15%

可定制任意非标尺寸

 

Gel Sealant HEPA/ULPA Mini-Pleated Filter, Class H13 to U16
液槽密封型密褶式高效/超高效过滤器

Advantages 特点:

Low pressure drop
阻力低
Double faceguard
双面保护网
Guaranteed performance
性能稳定
Individually tested according to EN 1822
依据EN1822逐台测试
Gel sealant
液漕密封型

 

Application:Final or return filtration for clean rooms with turbulent flow.
应用:适用于洁净室内层流风口的终端过滤和回风过滤

Specification 性能参数

Type:High efficiency filter panel(Gel Sealant).
类型:高效板式过滤器(液槽式)
Media:Wet-laid glass fibre paper.
滤材:抗水型玻璃纤维滤纸
Frame:Extruded and anodized aluminium.
外框材质: 阳极氧化铝合金型材
Separator:Hot melt glue.
分隔物: 热熔胶
Sealant:Polyurethane
密封胶: 聚氨酯
EN1822:2009filter class:
过滤效率等级:

H13(EN1822),≥99.95% at MPPS
H14(EN1822),≥99.995% at MPPS
U15(EN1822),≥99.9995% at MPPS
U16(EN1822),≥99.99995% at MPPS
Recommended final pressure drop:500 Pa.
建议终阻力:500Pa

Temperature:90"C maximum in continuous service.
连续稳定运行温度:不高干90'C

Thickness vs Efficiency vs Pressrue drop
厚度/效率/阻力-对应关系表
Thickness		初阻力Pressure drop
厚度		@0.45m/s/Pa
(lnches)	(mm)	H13	H14	U15	U16
21/2	69	105	110	120	140
31/2	90	75	80	90	110
41/3	110	60	65	70	85

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions            (HxW)		Air Flow
(lnches)	(mm)	m3/Hr@0.45m/s
12x12	305x305	150
12x24	305x610	300
207/8x207/8	530x530	450
207/8x24	530x610	520
207/8x447/8	530x1140	980
24x24	610x610	600
24x30	610x762	750
24x36	610x915	900
24x48	610x1210	1200
24x60	610x1524	1500
30x30	762x762	940
30x36	762x915	1130
30x48	762x1210	1500
30x60	762x1524	1880
36x36	915x915	1350
36x48	915x1210	1800
48x48	1210x1210	2400

Note: Pressure drcp+/-15%

Odd sizes available

注：阻力+/-15%

可定制任意非标尺寸

 

Sharp Edge HEPA/ULPA Mini-Pleated Filter,Class H13 to U16
刀边型密褶式高效/超高效过滤器

Advantages特点:

Close ploat design reduces the LCC
无隔板设计降低了运行成本
Light weighit,compact tructure
重量轻,结构紧凑
Low volatile
化学气体挥发性低
Individually tested aocording to EN 1822
依据EN1822逐台测试
Wide range of firation efficiency
过滤效率覆盖范围大

Different thickness filter in the different level of filtration
efficiency,the relationship curves of initial resistance and airflow velocity
不同厚度的过滤器在不同的过滤效率级别下，初阻力与气流速度的关系曲线图。

Application:For clean room,phaaceuic tactory,biologcal
factory,food processing plants and ary ptace need to control the air pollution.
应用:适用于工业洁净室.生物医药车间,食品加工车间或任何需要控制空气颗粒污染的场合.

Specification 性能参数
Type:High efficiency filter panel
类型: 高效板式过滤器
Media:Wet-laid glass fibre paper
滤材:抗水型玻璃纤维滤纸
Frame:Extruded and anodzed aluminum(Sharp Edge)
外框材质:阳极氧化铝合金型材(刀边形)
Separator:Hot melt glue
密封胶: 聚氨酯
EN1822:2009filter class:
H13(EN1822),≥99.95％ at MPPS
H14(EN1822),≥99.995％ at MPPS
U15(EN1822),≥99.9995％ at MPPS
U16(EN1822),≥99.99995％ at MPPS

Recommended final pressure drop:500 Pa
建议终阻力:500Pa
Temperature:90°C maximum in continuous service
连续稳定运行温度:不高于90°C

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)	Air Flow(m3/Hr)
(mm)	0.3m/s	0.35m/s	0.4m/s	0.45m/s	0.5m/s	0.55m/s	0.6m/s
305x305	100	117	133	150	167	183	200
305x610	200	233	267	300	333	367	400
530x530	300	350	400	450	500	550	600
530x610	347	404	462	520	578	636	693
530x1140	653	762	871	980	1089	1198	1307
610x610	400	467	533	600	667	733	800
610x762	500	583	667	750	833	917	1000
610x915	600	700	800	900	1000	1100	1200
610x1210	800	933	1067	1200	1333	1467	1600
610x1524	1000	1167	1333	1500	1667	1833	2000
762x762	627	731	836	940	1044	1149	1253
762x915	753	879	1004	1130	1256	1381	1507
762x1210	1000	1167	1333	1500	1667	1833	2000
762x1524	1253	1462	1671	1880	2089	2298	2507
915x915	900	1050	1200	1350	1500	1650	1800
915x1210	1200	1400	1600	1800	2000	2200	2400
1210x1210	1600	1867	2133	2400	2667	2933	3200

Note: Pressure drcp+/-15%

Odd sizes available

注：阻力+/-15%

可定制任意非标尺寸

 

HEPA BOX
抛弃式/可更换式高效送风口

Advantages特点:

Low pressure drop
阻力低
Convenient maintenance
维护方便
Guaranteed performance
性能稳定
Individually tested according to EN 1822
依据EN1822逐台测试

 

Application:Final or return filtration for clean rooms with turbulent flow.
应用: 适用于洁净室内层流风口的终端过滤和回风过滤

Specification 性能参数

Type:High efficiency fiter panel(Gel Sealant).
类型:高效送风口
Media:Wet-laid glass fibre paper.
滤材: 抗水型玻璃纤维滤纸
Frame:Extruded and anodized aluminium.
外框材质:阳极氧化铝合金型材
Separator:Hot melt glue.
分隔物: 热熔胶
Sealant:Polyurethane
密封胶:聚氨酯
EN1822:2009filter class:
过滤效率等级:

H13(EN1822),≥99.95% at MPPS
H14(EN1822),≥99.995% at MPPS
U15(EN1822),≥99.9995% at MPPS

Recommended final pressure drop:500 Pa.
建议终阻力:500Pa
Temperature:90°C maximum in continuous service
连续稳定运行温度：不高于90°C

 

Thickness vs Efficiency vs Pressrue drop
厚度/效率/阻力-对应关系表
Thickness		初阻力Pressure drop
厚度		@0.45m/s/Pa
(inches)	(mm)	H13	H14	U15	U16
21/2	69	105	110	120	140
31/2	90	75	80	90	110
41/3	110	60	65	70	85

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)		Air Flow
(lnches)	(mm)	m3/Hr@0.45m/s
12x12	305x305	150
12x24	305x610	300
207/8x207/8	530x530	450
207/8x24	530x610	520
207/8x447/8	530x1140	980
24x24	610x610	600
24x30	610x762	750
24x36	610x915	900
24x48	610x1210	1200
24x60	610x1524	1500
30x30	762x762	940
30x36	762x915	1130
30x48	762x1210	1500
30x60	762x1524	1880
36x36	915x915	1350
36x48	915x1210	1800
48x48	1210x1210	2400

 

Note: Pressure drcp+/-15%
Odd sizes available
注：阻力+/-15%
可定制任意非标尺寸

Room Side Replacement Terminal Filter Housing
液槽密封的下更换高效送风口

Advantages特点:
Can be used DOP/PAO testing method.
可带压差测试快接口
General or Gel sealant form.
可迭择普通密封形式或者液槽密封形式
3 diffusor type
3种形式的散流板可供迭择

Applications:Terminal supply air housing for bio-cleanroom.hospital cleanroom.
应用: 生物, 医院等洁净室的送风末端。

Specification 性能参数
Type:HEPA filter housing
类型:高效过滤器送风口
Frame: Aluminium/Stainless steelPlastic ptating galvanized
外框材质: 铝合金/不锈钢镀塑处理的镀锌钢版
Diffsor:same with the frame.
散流板:同外框材质
Damper:Adjustable in room available.
风阀:室内可调节可选

Model	Housing Size	lnstallation size	Colar Size	Hepa Size
	(WxHxD)mm	(WxH)mm	￠(mm)	(WxHxD)mm
CFRTH	1090x695x230	1098x703	400	1030x635x90
CFRTH	695x695x230	703x703	305	635x635x90
CFRTH	476x476x230	484x484	305	416x416x90

 

Dimensions vs Air flow
长&宽尺寸/风量-对应关系表
Dimensions(HxW)		Air Flow
(lnches)	(mm)	m3/Hr@2.5m/s
24x12	592x287	1900
24x24	592x592	3700
24x22	595x495	2800
Note: Pressure drcp+/-15%

 

Type V	Sensitive,Condensables,Organic gas,etc
Type A	H2S,SO2,HCL,HF,etc
Type B	NH3,Amines,etc

 

AC/EC Fan Module of FFU
交流/直流风机过滤单元

Advantages 特点:
Extremely lower energy consumption than AC module
超低的能耗
Low noise level
低噪音水平
Achieves higher pressure differential than AC module
达到高压差
Installation from top or room side;no separate suspension
上安装或下安装模式,没有独立悬挂
The built-in censored cotton,and all flow structure
内置消音棉和均流结构

Applications:Applied in high level cleanroom,such as:
pharmaceutical factory,semiconductor factories ,etc
应用:应用于需要严格控制洁净度的环境中,例如:药厂,半导体工厂等.

Specification 性能参数
Type:AC/EC fan module of FFU
类型: 交流/直流风机FFU模块
Frame: 0.8/1.2 mm,Galvanized steel plate
外框材质:0.8/1.2mm锌铝涂层钢板
Motor:AC/EC Brushiess motor
风机马达: 交流/直流无刷马达
Dynamic balance level:G2.5(German DIN ISO 1940 standard)
风机动平衡等级:G2.5(德国DIN ISO 1940标准)
Control:Group control by RS485 or LON system.
控制:PC镇群控
Input power:1ph/220V/50Hz
输入电源:1ph/220V/50Hz
Fault alarm lamp: Optional dopended on deruand
故障报警灯:根据需要可选

Model	Module size	Achual size	height	weight	motor	TSP	Strepitus	power
	模数尺寸	实际尺寸	高度	重量				consumption
型号	WxD（mm）	WxD（mm）	H（mm）	KG	风机马达	全压	噪音	耗电量
CFFU-42-AS	1200x600	1174x574	285	29	LCAC-310	≥195Pa	53	125
CFFU-42-AH	1200x600	1174x574	285	31	LCAC-355	≥260Pa	55	145
CFFU-44-AH	1200x1200	1144x1144	410	60	Ziehl-Abegg	≥220Pa	54	280
CFFU-42-ES	1200x600	1174x574	285	29	LCEC-310	≥225Pa	53	100
CFFU-42-EH	1200x600	1174x574	285	31	LCEC-355	≥290Pa	55	110
CFFU-44-ES	1200x1200	1144x1144	410	60	Ziehl-Abegg	≥250Pa	54	180

Note: Odd sizes available

Working point:surface wind speed of 0.45 m/s

注：可定制任意非标尺寸

工况点：面风速0.45m/s

 

 

辽宁明创环保科技有限公司，过滤器生产厂家生产定制各种过滤器产品.欢迎咨询订购。

辽宁明创环保科技有限公司
联系人：英宝春
地址： 辽宁省沈抚新区顺平路和美馨居12-3号-M2
手机： 18642359778
电话： 024-52861313
邮箱： ybch@163.com
QQ：95773936 微信：18642359778